Indian Tool

High Performance Drills

‘ITM’ s HSS Taper Shank Ground Fluted HIGH PERFORMANCE DRILLS are Manufactured on Special Purpose Machine by Using State – of – the – art Technology, Capable of Producing

  • Absolute surface finish on flute & clearance diameter
  • Consistency & Repeatability on tool Geometry
  • Optimum Hardness Retained Throughout.

By Enabling :

  • Higher Operational speed & feed than conventional Drills.
  • More numbers of holes per resharpening due to smooth chip flow resulting in faster heat dissipation.

High Performance Drills Are Versatile on Various Types of Material Having Hardness Ranging Upto 30HRC.

Being Fully Ground Finish Drills Enables Better Uniformity of Surface Coating like TiN, TIAIN Etc. Which Enhances Tool Life.

HIGH PERFORMANCE DRILLS are Available off Shelf in Sizes of 9mm to 20mm : 23/64″ to 25/32″.

HSS Screwing Taps

Available in a Wide Range of Sizes, Types And Combinations.

TYPE : Hand and Short Machine Taps, Long Shank Machine Taps, Nut Taps Pipe Taps, BSW, BSF, UNC, NC, NF, NGT and special Taps.

Size Range :3mm – 100mm : 1/8″ – 4″

Material : HSS – M2

Note : Taps can be Supplied as per Customer Needs on Request as Follows :

  • Serial or non Serial
  • Individual Pieces or tn Sets
  • Different Type of Flute Like Straight, Helical, Spiral, Spiral Point & Fluteless
  • In Different Grades Of HSS Like M35, M42 etc.
  • Various Surface Coating Like Tin, TiAIN ets
  • Special Taps as Per Customer’ s Drawing.

Hss Reamers

Avilable in a Wide Range of Diameters And Manufactured to Suit Specific Reaming Operations to Provide Perfect Accuracy And Optimum Surface Finish.

TYPE : Parallel Hand Reamers, Long Fluted Machine Reamers, Chucking Reamers With Parallel Shank or taper Shank, Bridge Reamers, Taper pin Reamers, Socket Reamers, Machine Jig Reamers, Centre Reamers Shell Reamers Etc.

Size Range :3.0mm – 76.2mm : 1/8″ – 3″

Material : HSS – M2

Note : Reamers Can Also be Supplial as per Specific Customers Needs as Follows :

  • Non Standard And Special As Per Customers Drawings.
  • Intermediate Diameters.
  • In Different Grades Of HSS Like M35, M42 etc.
  • Various Surface Coating Like Tin, TiAIN ets

Hss Milling Cutters

Available in a Wide Range of Diameters And Types Suitable for Various Types of Milling Operations.

Size Range : Shank Type Cutters : 3mm – 63mm : 1.1/2″ – 10″

TYPE : Cylindrical Cutters, Side & Face Cutters, Shell End Mills, Single And Double Angle Cutters, Face Cutters, Slotting Cutters, Keyway Milling Cutters, Hollow Mill, Convex And Concave Milling Cutters, Single And Double Corner Rounding Cutters, Parallel And Taper Shank Slot Drills, End Mills, “T” Slot Cutters With Parallel Shank And Cutters As Per Special Design.

Material : HSS – M2

Note : Milling Cutters Can Also Be Supplied As Per Specific Customers needs As Follows :

  • Non Standard And Special As Per Customers Drawings.
  • Intermediate Diameters.
  • In Different Grades Of HSS Like M35, M42 etc.

Masonry Drills

ITM’s Carbide Tipped Masonry Drills are Manufactured From Alloy Steel, have Ground Flutes, are in Bright Finish and Combined With ITM’s unique Brazing and Treatment process Results in Withstanding Shock and Outstanding Resistance to Wear During its use.

TYPE : ITM Masonry Drills are available in three Categories. Standard, Delux and Super Granato

Size Range : 3mm to 13mm : 1/8″ to 1/2″ in all three Categories.

Standard Masonry Drills : Suitable for all General Purpose. Available in 10 Pcs Packing.

Deluxe Masonry Drills : Specially Developed for use on tougher Material like Stonework, Concrete and Marble etc.

Super Granato : Brazed With Superior Grade of Carbide Tip for Exclusive use on Granites. Available in Single pc Packing.

Hss Tool Bits

Backed by The High Quality of High Speed Steel Material ITM Manufactures a Comprehensive Rang of HSS Tool Bits. Dagger Toolbits Ensure Maximum Red Hardness For Greater Endurance.

Rigorous and Regular Metallurgical Tests are Undertaken to Analyse The Quality as Well as the Composition of the raw Materials used. These Include Determination of Carbide Size, Decarb, Segregation, Grain Size, Response to Heat Treatment etc., Thus Guaranteeing Smooth, Trouble Free Performance.

Size Range :Square Tools Size 5mm – 25mm : 3/16″ – 1″

Material : HSS – M2 & T42

Note :

  • Cryogenic Treatment For Special Applications on Request
  • All Square Tool bits are Supplied With the Bevel Angle of 150.

HSS Twist Drills

ITM offers a extensive range of standard and special twist drills in different grades of HSS, available in various diameters.

RANGE :

TYPE : Parallel Shank Stub Series, Jobber Series, Long Series, Taper Shank Drills, Core Drills, Extra long drills with Parallel & Taper Shank, Combined drills and countersinks(Centre drills), Taper Pin Drills, Shell drills, Special Drills etc.

Size Range : Parallel Shank Twist Drills: 0.3mm – 31.5mm, 3/64″ – 1.15/64″ Taper Shank Drills : 3.0mm – 102mm : 1/8″ – 4″ Max OAL – 2000mm

Material : HSS-M2

Note :- Drills can be supplied as per specific Customers needs on Request as follow:

  • Intermediate Diameters.
  • Non Standard and Special Drills.
  • In different grade of HSS like M35, M42 etc.
  • Various surface coating like TiN, TiAIN etc.
  • Special Geometry to suit various applications.

Engineers Files

Dagger Brand Files are made from the finest file steel material on State – of – the – Art Production Line. Files are manufactured on unique hydropneumatically controlled machines resulting in uniform Teeth Geometry and consistent desired finish cutting quality with.

TYPE : Machine Files, Saw Files, Rasps, Special Files & Mill Files

Size Range : 100mm to 350mm : 4″ to 14″

Cuts : Single Cut, Double Cut, Bastard Cut, 2ndCut, Smooth Cut & Rasp Cut

Shapes : Rectangle, Square, Round, Triangle, Half Round

Files are available in 10pcs packing up to 250mm & 5pcs packing for above 250mm.

CNC Rotating Tool

Birla Precision Technologies (erstwhile Birla Kennametal Ltd) was established in the year 1986, as a Joint Venture with Kennametal Inc, USA to manufactures wide range of BPT brand precision AT3 Class Steep Taper as well as HSK tooling,advanced products like hydro grip and shrink fit CNC tooling’s in most modern and well equipped manufacturing facility at Aurangabad,India.

Rotating Tool Holders

Manufactured from high quality Case Carburising Steel and in a temperature controlled Grinding facility.

Birla Precision AT 3 class tool holders represent the highest degree of technical excellence and the perfect answer to the needs of high speed and high accuracy machining ensuring a high level of consistency and accuracy.

Scroll to Top